Table of contents
3QLCLM
Edition: 04/2014
6
2.0 Safety instructions
2.1 General information
Power chucks may result in risks if their use and handling does not correspond to the safety
requirements. The power chuck has been built based on state-of-the-art technology and is safe to use.
However, the power chuck can pose certain risks if it is used improperly or not as intended by
unqualified personnel.
The following instructions are meant for personal safety and prevention of damages to the described
product or connected devices.
Read this operating manual before starting work with the power chuck and follow all safety
instructions. Non-compliance with the instructions contained in this manual may result in
mortal danger, severe bodily injury or severe material damages.
•
Only qualified staff are allowed to work with the power chuck.
•
Unauthorized modifications and changes to the power chuck are not allowed.
•
Use the power chuck only in perfect condition.
•
Switch off the machine before working on the chuck and secure the machine
against unintentional restart.
•
Only use original components and spare parts of the manufacturer. Warranty shall
not be applicable if foreign parts are used.
•
Before starting work with the power chuck, check whether all safety equipment are mounted
•
The system "lathe-clamping device-work piece" is mainly influenced by the work piece to be
produced, which may result in a residual risk. This residual risk must be evaluated by the
operating company.
The manufacturer is not liable for damages resulting from non-compliance with the
operating manual!
