P| 1
ANGEL'S TRELLIS SWING
www.ForeverRedwood.com
NOTE:
Assembly is best done by two people. To assemble your product, you need a Hammer, a Ratch, a Drill, and an impact
drill.
PROCESS TO INSTALL THE HARDWARE PROVIDED.
Required Tools (Are not included in your hardware packing).
To install the bolts.
Insert the carriage bolts into the holes and lightly tap with a hammer until the square neck fit in the wood piece and
the bolt head must flush with the wood piece. Finally, place the washer and the nut and carefully tighten it using a
ratch with the necessary socket or a wrench.
