P| 9
ANGEL'S TRELLIS SWING
www.ForeverRedwood.com
Step 3:
Use 3/8” x 6 ¾” bolts
(BL1)
to attach the simple supports with in-between blocking-A
(3)
to the single support-A
(2).
Check the marked on each support with in-between blocking and place as drawings shown.
Note: return to the bolts described in the step 2 and tighten fully to attach in-between blocking to the post.
Note: put silicone in the support with in-between blocking joins.
Step 4:
Use 3/8” x 6 ¾” bolts
(BL1)
to attach the main knee brace
(5)
to the supports
.
After that use 3/8” x 9” bolts
(BL2)
to
attach the
main
knee brace
(5)
to the posts
(1).
Check the marked numbers on each main knee brace and place as drawings
shown.
BL1
BL1
5
3
BL2
