3
Hardware Package
T
U
W
X
Y
V
Z
AA
BB
CC
DD
PREPARATION
Carefully remove and lay out all hardware and parts. Check quantities and match the parts list. Construct
Crib on an even flat floor. Note: during the assembly process whenever using screws or bolts, check each
with the parts list by letter and size identification. Place each screw or bolt on the diagram of the item
which is sketched actual size. Be sure to use the proper size specified in the assembly directions. If any
parts are missing or broken or you need assistance with assembly
DO NOT return your product to the
dealer.
Please identify the crib by the model number identification stamped on the inside face of the Short
Head Assembly and Short Foot Assembly when you call or write to Foundations. Make note of all
identification numbers and include this information with your request.The Allen Head Bolts (V and Y) have
a friction enhancing patch on the thread which may cause resistance during tightening.
DO NOT Substitute Parts!
SUGGESTED TOOLS
#2 Medium Straight Screwdriver
PARTS LIST HARDWARE
Part Description
Part Number Quantity
11200971
11200997
11201000
11200984
11200974
11200976
T. Allen Head Bolt 6mm x 80mm
U. Allen Head Bolt 6mm x 70mm
V. Allen Head Bolt 6mm x 12mm
W. Allen Head Bolt 6mm x 55mm
X. Allen Head Bolt 6mm x 45mm
Y. Allen Head Bolt 6mm x 17mm
4
16
8
1
2
Part Description
Part Number Quantity
Z. Connector Nut
AA. Joint Connector Nut
BB. Dowel 30mm
CC. Steel Pin
DD. Allen Wrench
11201001
11200970
11200969
11201002
11200978
8
8
4
6
22
8
