PRE-DRILL
WITH 2MM BIT
FOR ALL STEPS
BELOW.
PRE-DRILL
WITH 2MM BIT
FOR ALL STEPS
BELOW.
60
MM
SCREWS
8
6c
Attach the Door Handle and Escutcheon
to the external face of the Door using their
supplied fixings.
Position and secure the Rim Lock Receiver to
the framework.
Test the key to ensure the lock
works accordingly.
Attach a turn button
at the top and bottom of
the Door Panel.
6b
DOOR LOCK
Fix the Lock Block
flush to the corner of the
framework on the back of the Door.
Use a 16mm drill bit for the Door Handle hole.
Use the Escutcheon as a guide with 5-8mm
drill bits and drill 3 x holes to provide the hole
for the key.
Secure the Rim Lock to the Lock Block with
its supplied fixings.
Ensure to hook the Rim
Lock over the edge of the Lock Block. Thread
the spindle through to attach the Handle.
INSIDE
LOCK BLOCK
TOP TIP:
Mark out with pencil, use the rim lock
as a guide to drill the holes in the correct positions.
DOOR FIXINGS
INSIDE
INSIDE
INSIDE
OUTSIDE
OUTSIDE
TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT
CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients
- Basic Copper Carbonate, Benzalkonium Chloride. (Pressure Treated Sheds)
For use in above-ground and in-ground conditions. Wear gloves when handling freshly treated wood. Avoid breathing wood dust,
treated or untreated. Do not burn off-cuts.
