background image

BEFORE YOU START

Please read through these instructions to familiarise yourself with your shed. We recommend that you 

check all the 

components

 using the lists found on the front and back pages before you start to build.

All of our sheds are constructed in the same way. They simply come with different components depending on the type 

of shed you have. Don’t worry if your fixing pack contains some spare items at the end of the build (you haven’t missed 
a bit!) we have sent you a generic fixing pack to suit the shed range.

Please take care when unpacking, handling and assemblying the toughened safety glass windows. We recommend 
wearing cut-resistant gloves in the event of a breakage, as it will disintegrate into small pieces.

It’s vital that you build your new shed on a 

solid, level base.

 Timber or Plastic Shed Bases are 

ideal, as is solid concrete or concrete slabs.

We recommend using the following tools (not supplied):

If you have an existing base and think it’s suitable for your new shed to be sited on, it is 

important you check that it is level and doesn’t deviate by any more than 15mm from edge to 
edge. If this isn’t the case the building will twist, causing gaps to appear in the sections and the 
roof, doors and windows to misalign.

There’s more information on base preparation on our website 

www.forestgarden.co.uk

Assembly is relatively straightforward if your follow these step by step instructions.  
We recommend getting everything aligned properly before screwing together and that 

screw holes should be pre-drilled

 to avoid splitting the timber.

BASE

 

PREPARATION

TOOLS NEEDED

Timber Base 

Self-constructed/ 

Buy pre-made

Tape 

Measure

Sharp Knife

Pozidrive 

Screwdriver

Drill & 

2-16mm Drill 

Bits

Hammer

Concrete

Concrete surface/ 

Concrete slabs

Pro Shed Base

Interlocking 

eco-friendly base

Soil

A base of soil 

only

Broken Slabs/Gaps

Uneven slab sizes 

with no cement

REMINDER

Always pre-drill before 

screwing.

IMPORTANT

Assembly requires 2+ 

adults.

Ladder

2

Spirit Level

PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN

Summary of Contents for Timberdale Tongue & Groove










Reviews: