5
│
Installing the Forest Shuttle
®
S / M / L
Z-Wave
IR channel setting:
For Infra Red control
an IR remote and an IR receiver is required. Standard the Shuttle is set to channel 1 and ‘ALL’. To c
hange to
channel 2, 3 4 or 5, press resp. 12x, 13x, 14x or 15x button and confirm by pressing button once more for 4 seconds until the led
blinks 3 times and goes OFF.
The IR receiver can only be connected to port 1. Place the eye of the receiver cord in view of the IR remote.
If necessary, change the IR channel as shown on page 4.
Factory default:
To reset all settings, press button 16x. To confirm, press button once more for 4 seconds until the led blinks 3 times and goes
OFF.