background image

BEFORE YOU START

Please read through these instructions to familiarise yourself with your summerhouse. We recommend that you 

check 

all the components

 using the lists found on the front and back pages before you start to build.

All of our summerhouses are constructed in the same way. They simply come with different components depending on 

the type of summerhouse you have. Don’t worry if your fixing pack contains some spare items at the end of the build 
(you haven’t missed a bit!) we have sent you a generic fixing pack to suit the summerhouse range.

Please note that your 

door

 

windows have a coloured protective film on them.

 We advise to keep the protective film 

on, until the build is complete to prevent any possible damages to the windows during assembly.

It is vital that you build your new summerhouse on a solid, level base. Timber or plastic bases are 
ideal, as are concrete slabs or solid concrete.

We recommend using the following tools (not supplied):

If you have an existing base and think it is suitable for your new summerhouse to be sited on, 

it is important that you check it is level and doesn’t deviate by any more than 15mm from edge 
to edge. If this is not the case, the building will twist causing gaps to appear in the sections and 
causing the roof, doors and windows to misalign.

There is more information on base preparation on our website 

www.forestgarden.co.uk

Assembly is relatively straightforward if you follow these step-by-step instructions. 
We recommend aligning components properly before securing them together and 

pre-drilling

screw holes to avoid splitting the timber.

BASE

 

PREPARATION

TOOLS NEEDED

Timber Base 

Self-constructed/ 

Buy pre-made

Concrete

Concrete surface/ 

Concrete slabs

Pro Shed Base

Interlocking 

eco-friendly base

Soil

A base of soil or 

grass only

Broken Slabs/Gaps

Uneven slab sizes 

with no cement

REMINDER

Always pre-drill before 

screwing.

IMPORTANT

Assembly requires 2+ 

adults.

2

PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN

Tape 

Measure

Sharp Knife

Pozidrive & 

Flat-head  

Screwdriver

Drill & 2mm 

Drill Bit

Hammer

Ladder

Spirit Level

Hand Saw

TO AVOID DANGER OF SUFFOCATION, PLEASE KEEP THIS FILM AWAY FROM BABIES AND CHILDREN

Summary of Contents for OPPSUM106DDM












Reviews: