3
EN
DE
FR
NL
QUICK START | ASSEMBLED TRACKS
PROGRAMMING DIAMOND SENSE REMOTE CONTROL
It is not necessary to fix the Shuttle motor to the track for programming a channel to a Shuttle motor.
If the motor does not respond to the remote control,
reset the end positions. See page 5.
RE-ADJUSTING THE OPEN AND CLOSE END POSITION
The OPEN and CLOSE end positions are already set to the curtain track. Adding extra carriers is
taken into account. When the end positions need to be changed, take next steps:
Note: Curtains should be in the open position.
Now the end positions are reset and have to be set again:
1. Push the curtain towards the CLOSE position until the motor takes over.
2. The motor will open the curtain automatically. When it is reached, the yellow LED flashes.
3. Pull the curtain to the desired OPEN position, this can be done as long as the yellow LED is
flashing.
4. Let the curtain hang at the desired OPEN position until the yellow LED goes off.
5. Ready for use!
First select
the desired
channel
Press
button 3x
with a pen
LED moves
from 1
st
2
nd
3
rd
led
Keep button
pressed
for 5 sec.
Green LED
starts
blinking
Within
10 sec.
press open
Press button 4x
with a pen
LED moves from
1
st
2
nd
3
rd
4
th
led
Keep button
pressed for 5 sec.
Yellow LED blinks
and goes off
1
1
2
2
3
3
4
4
5
6
4 x
1 x 5 sec.
3 x
1 x 5 sec.
PAGE
5
