Forest Master Model: FM6DD/FM4DDE
2
Your Product
Thank you for purchasing the Forest Master Direct Drive Wood Chipper. We hope
you are 100% satisfied with your product but if you have any questions or queries,
please don’t hesitate to contact us:
Forest Master Ltd Sales Tel: +44 (0)191 265 5000
Industry Road Email: [email protected]
Heaton Website: www.forest-master.com
Newcastle Upon Tyne Technical Enquiries Tel: +44 (0)191 276 6553
NE6 5XB
About Your Product
This manual is for models:
FM6DD - 6hp Petrol Engine
FM4DDE - 4hp Electric Motor
The FM6DD and FM4DDE are wood chippers specifically designed to chip all kinds
of wood that has been freshly cut up to 50mm (2”) diameter. NOTE: Do not insert
wood over the diameter specified, roots or trunks, stones, plastic, metal or any
other objects that are not specifically wood branches. Do not insert seasoned wood
as the chippers are designed for freshly cut soft and hard wood.
Please thoroughly read the safety instructions and guidelines and make sure you
are familiar with them before use.
CE Regulation Parts
To comply with CE regulation (countries with the EU), the Hopper Safety Plate (9)
and M3 Discharge Chute Safety Bolts (39) must be installed for your own safety
(Check exploded diagram for parts).
For non-CE regulation (e.g. use in the United States or outside of Europe) these
parts can be removed to make the chipper easier to use, but at the risk of your own
safety. Forest Master Ltd will accept no responsibility for injuries caused by using
the chipper without these parts installed.
