15
FM6FF & FM8FF (Electric & Petrol)
Assembly
Attach the shorter of the two plain guard panels to the right side of the work bench. For the orientation
of the panel see the diagram below.
Use 3 M6x12 button head bolts, 6 M6 flat washers (1 under each bolt head and 1 under each nut) and
3 M6 nyloc nuts.
30
30
20
20
TOP
BOTTOM
Attach the two flanged panels to the flat top panel, note that the flanges on the angled panels go on
top of the top panel. Use M6x12 button head bolts, M6 flat washers either side and M6 nyloc nuts.
Do not join the longer angled panel to the top panel at it’s rear corner at this stage. This corner is
secured to the back panel in the next step.
Do not bolt this corner
