![background image](http://html.mh-extra.com/html/forest-master/fast-fire-fm6ff-139/fast-fire-fm6ff-139_manual_2319370013.webp)
13
FM5, FM8 & FM10 (Versions D, T & TW)
Assembly
Attaching The Work Bench
For shipping, the rear mounting brackets are fastened to the faces to which they attach, in a reversed
position. Before assembly, remove the long mounting bracket (it will be re-attached later) and remove
then reverse the short rear bracket. Note that it must still be fixed to the inner face of the rear side.
REMOVE
REVERSE
Attach the work bench to the log rail mounting points using the Bench Mounts (part 14), M6x40 cap
head bolts, M6 spring washers, M6 flat washers. There are 4 mounting points but note that one of the
rear mounting points is for the long rear bracket, which is attached in the next step. Do not fully tighten
the bolts until after the next step. The bench mounts are placed between the body and the mounting
brackets with the tapered end of the mount towards the body.
bench mount
flat washer
spring washer
M6x40 cap head