VICTORIAN
WALL GREEN HOUSE
Fixing Pack (VICTGHFP)
Not to Scale
Important :
Assembly of this
product requires a
minimum of two
adults.
MUST PRE DRILL
B
VICTGH PARTS LIST
1
2
A
C
D
H
F
A
K
M
E
J
N
O
L
G
I
A
I
I
J
LOCKBLOCK Qty 1
45451400WB Qty 1
BATTEN 45x45x1400mm
with badge
TWGOPWIN Qty 2
(Opening Window)
TWGWIN Qty 2
(Fixed Window)
35121950 Qty 2
STRIP 35x12x1950mm
TWGFOLDSHLFV2 Qty 2
(Folding Shelf)
VICTGHSHLF Qty 4
(Fixed Shelf)
TWGSIDE Qty 2
TWGBACK Qty 2
PROP35120300 Qty 2
STRIP 35x12x300mm
35120793 Qty 3
STRIP 35x12x793mm
35121610 Qty 2
STRIP 35x12x1610mm
35351400 Qty 1
BATTEN 35x35x1400mm notched
35120347 Qty 2
STRIP 35x12x347mm
=
Fix the two battens as shown again using a 60mm screw for each end. Make sure you pre-drill.
The bottom 35x35x1400mm batten must be set back as shown in the square above.
Make sure that the notch in batten ‘N’ is on the inside of the green house.
Make sure that the notch on batten ‘J’ is facing up.
Fix the side panels to each of the back sections, screwing through the outside of
the side panels into the back panel, using 3 x 60mm screws for each.
Fix the two back panel together, screwing at an angle, with the 3 x 70mm screws
through the framework at the back.
Handle
Qty 2
40mm Hinge
Qty 12
30mm Screw Qty 20
IMPORTANT, RETAIN FOR FUTURE REFERENCE; READ
CAREFULLY
- Always pre-drill the timber to avoid splitting.
- The timber in this product is pressure treated to ensure
longevity and protection against rot. This may leave colour
variations, but these will even out as the moisture content
stabilises
.- Timber is a natural material and will shrink and swell as a
result of varying moisture content.
- Please keep all plastic bags and small parts away from
children
- This product must be built on a solid level base.
Technical Help line: 0333 321 3142 8.30 am and 5.00 pm
Monday to Friday.
In line with your statutory rights, please check all parts prior
to assembly, as assembly of damaged parts may be
deemed to be acceptance and this may affect the remedies
you are entitled to. If the product is not constructed in
accordance with the instructions, or is altered in anyway
(e.g. painted), the manufacturer cannot be held liable for
any resulting damage.
POZI DRIVE SCREWDRIVER
DRILL
HAMMER
TAPE MEASURE
SPIRIT LEVEL
Latch
Qty 1
70mm Screw Qty 7
60mm Screw Qty 20
5.0 x 25mm Screw Qty 4
40mm Screw Qty 26
issue 0217
Badge on the
outside
35mm
Receiver
Qty 4
25mm Screw Qty 74
Bolt
Qty 6
TWGDOORV2 Qty 4
Notch
E
E
A
PRE-DRILL
PRE-DRILL
