ENCLOSURE ASSEMBLY
15
D
TIP: Before han-
dling the impact
screen, wash your
hands thoroughly
to avoid blemish-
es or stains on
the white materi-
al. And make sure
the floor is clean
too.
Begin by using (4) bungee balls to at-
tach the screen to the four corners.
The bungee cord should be thread-
ed through the grommet holes in the
screen, then wrapped around the
pole. Make sure the bungee ball is
positioned outside of the enclosure.
Repeat the bungee ball attachment
through every grommet hole of the
impact screen. Move to the back of
the screen and enclosure to attach the
back flaps along the uprights. These
flaps will conceal the bungee balls for
a finished look.
