NOTE:
Observe the LED while performing the following step.
NOTE:
The VSS module will automatically program itself once connected to the harness / vehicle. The VSS
system should immediately flash the LED 3 times to indicate that it is entering "Auto Learn Mode".
Auto learn completes at "power-up" of the module, and once it is complete, the LED will stay On. Turn
on the vehicle's ignition to exit "Auto Learn Mode" .
13. Connect the T-harness to the VSS module.
Shock Sensor Sensitivity Adjustment
NOTE:
The VSS module is equipped with an internal dual zone Shock Sensor. The VSS system will activate a
single horn honk / single light flash anytime a light to moderate impact is detected, and a "panic" type 30
second horn honk / light flash sequence when a heavy impact is detected while the VSS system is
armed. Adjustment of both zones is accomplished through a single adjustment knob on the VSS module.
INSTALLATION (Continued)
201
3
Focus
Vehicle Security
4
Page 4 of 6
SK9L2J-19G364-AA
© Copyright Ford 2012 FoMoCo
