Ford u207 explorer sport Owner'S Manual Download

Page: 188 / 200

Item

Ford Part Name
or equivalent

Ford Part
Number

Ford
Specification

Power steering
fluid

Motorcraft
MERCON
Multi-Purpose

威

ATF

XT-2-QDX

MERCON

威

Ford
conventional and
Traction-Lok rear
axles

2, 3, 4

Front axle (4X4)

Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant

XY-80W90-QL

WSP-M2C197-A

Transfer case
(4X4)

Motorcraft
MERCON
Multi-Purpose

威

ATF

XT-2-QDX

MERCON

威

Transfer case
Front Output Slip
Shaft

Premium
Long-Life Grease

XG-1-C or
XG-1-T or
XG-1-K

ESA-M1C75-B

Windshield
washer fluid

Motorcraft
Premium
Windshield
Washer
Concentrate

ZC-32–A

WSB-M8B16–A2

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON

威

and MERCON

威

V are not interchangeable. DO NOT

mix MERCON

威

and MERCON

威

V. Refer to your scheduled maintenance

guide to determine the correct service interval.

Conventional rear axles are filled with Motorcraft SAE 80W-90 Premium

Rear Axle Lubricant, part number XY-80W90-QL, Ford specification
WSP-M2C197-A.

Traction-Lok rear axles are filled with Motorcraft SAE 75W-140 High

Performance Synthetic Rear Axle Lubricant, part number
XY-75W140–QL, Ford specification WSL-M2C192-A.

Add 118 ml (4 oz) of Additive Friction Modifier XL-3 or equivalent

meeting Ford specification EST-M2C118–A to Traction-Lok rear axles
whenever the axle has been serviced.

2003 U207 Explorer Sport

(u27)

Owners Guide (post-2002-fmt)
USA English

(fus)

Maintenance and Specifications

188

Summary of Contents for u207 explorer sport









































































































































































































Search results

Summary of Contents for u207 explorer sport

Reviews:

Related manuals for u207 explorer sport

Brands by name

Popular brands

Ford u207 explorer sport, Owner'S Manual

Search results

Summary of Contents for u207 explorer sport

Reviews:

Related manuals for u207 explorer sport

Brands by name

Popular brands