To unlock all doors,
press the 3
•
4 control within five seconds.
To lock all doors,
press the 7
•
8 and the 9
•
0 at the same time. You
do not
need to enter the keypad code first.
Note:
The interior lamps
will turn off.
Autolock (if equipped)
This feature will automatically lock all the doors when:
•
all the doors are closed,
•
the ignition key is in the ON position,
•
the gearshift lever is shifted into, then out of, R (reverse) and then
•
the brake pedal is released.
This feature will also automatically relock all the doors when:
•
the ignition is in the ON position and any door is opened then closed,
and
•
you put the vehicle in motion by releasing the brake pedal.
Deactivating/reactivating the autolock feature
The autolock feature can be deactivated/reactivated using the following
two methods:
•
keyless entry keypad, or
•
ignition lock cylinder and interior power door locks control.
To deactivate/reactivate the autolock feature using the keypad
Your vehicle comes with the autolock feature activated. To
deactivate/reactivate this feature:
1. Turn the ignition to the OFF position.
2. Close all the doors.
3. Enter the 5-digit entry code.
4. Press and hold the 3
•
4. While holding the 3
•
4, press the 7
•
8
within five seconds.
5. Within 5 seconds of Step 4, release the 3
•
4.
6. Within 5 seconds of Step 5, Release the 7
•
8.
The horn will chirp once when the system has been successfully
deactivated.
The horn will chirp twice (one short and one long chirp) when the
system has been successfully reactivated.
2003 U207 Explorer Sport
(u27)
Owners Guide (post-2002-fmt)
USA English
(fus)
Locks and Security
58
Summary of Contents for u207 explorer sport
Page 200: ...200 ...
