Ford Transit Connect Page 35 Owner'S Handbook Manual Download

Page: 35 / 152

PRINCIPLE OF
OPERATION

The engine immobilisation system is
a theft protection feature which
prevents the engine from being
started with an incorrectly coded key.

CODED KEYS

E66506

Your vehicle is supplied with coded
keys.

WARNING

If a key is lost, it is imperative to
erase and recode the remaining

keys. Consult your dealer if you now
have only one valid key.

Replacement keys must be recoded
together with your other keys.

In case of loss, replacement keys are
available from dealers by stating the
key number shown on the tag
provided with the original keys.

Note:

To ensure a trouble’free data

exchange between the vehicle and
key, do not shield the keys with any
metal objects.

E66505

Key coding

A maximum of eight keys (including
the ones supplied with the vehicle)
can be coded using two other keys
previously coded for your vehicle.

Complete each of the following steps

within five seconds

E66507

1. Insert the first key in the ignition

switch and turn to position

2. Turn the key back to position

and remove from the ignition
switch.

Engine immobiliser

Summary of Contents for Transit Connect

























































































































































Search results

Summary of Contents for Transit Connect

Reviews:

Related manuals for Transit Connect

Brands by name

Popular brands

Ford Transit Connect, Owner'S Handbook Manual

Search results

Summary of Contents for Transit Connect

Reviews:

Related manuals for Transit Connect

Brands by name

Popular brands