manualshive.com logo in svg

Ford Transit Connect, Owner'S Handbook Manual, Page: 12 / 152

Share
Download
Ford Transit Connect Owner'S Handbook Manual Download Page 12

CHILD SEATS

E72336

WARNINGS

Extreme Hazard! Do not use a
child restraint on a seat

protected by an airbag in front of it!

Original text according to ECE
R94.01: Extreme Hazard! Do not

use a rearward facing child restraint
on a seat protected by an air bag in
front of it!

There is a risk of death or
serious injury when the airbag

deploys.

WARNINGS

Always have the rear row head
restraint raised when a child

restraint is being installed or
occupying the seat, provided doing
so does not move the child restraint
away from the vehicle seat.

Note:

If the vehicle has been

involved in an accident, have the child
safety seat checked by an expert as
it might be damaged.

Note:

Do not leave children

unattended in the child safety seat or
in the vehicle.

Note:

When installing a child

seat/restraint with the seat belt,
always ensure belts fit without slack
or twists.

WARNING

There is a risk of death or
serious injury when the

manufacturer’s instructions are not
followed properly or when the child
seat/restraint is modified in any way.

Whenever installing a child
seat/restraint, always read and follow
the manufacturer’s instructions.

WARNING

Do not hold a child on your lap
while the vehicle is moving.

10

Child safety

Summary of Contents for Transit Connect

























































































































































Reviews:

No comments