Ford Town Car 2006 Owner'S Manual Download

Page: 80 / 329

1. Press the MAP hard key.

2. Press “Nav Menu” in the bottom
left hand corner of the screen.

3. Press “Stored locations”.

4. Select “Memory Point”.

5. Press “Add” at the bottom of the
screen.

6. Select the desired menu item.

7. Enter/select any required details.
The new point will be added to the
stored list of memory points.

8. Press OK. The new point will be
added to the list of stored memory
points.

2006 Town Car

(tow)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for Town Car 2006










































































































































































































































































































































Search results

Summary of Contents for Town Car 2006

Reviews:

Related manuals for Town Car 2006

Brands by name

Popular brands

Ford Town Car 2006, Owner'S Manual

Search results

Summary of Contents for Town Car 2006

Reviews:

Related manuals for Town Car 2006

Brands by name

Popular brands