Ford Town Car 2006 Page 41 Owner'S Manual Download

Page: 41 / 329

Volume/power control

Press knob to turn the audio system
on/off. Turn to raise or lower
volume. The levels will be displayed
on the screen.

To activate the navigation mode,
press MAP or DEST.

To adjust the navigation voice output level, select the NAV MENU button
via the map screen.

Speed compensated volume (SCV)

With this feature, radio volume changes automatically with vehicle speed
to compensate for road and wind noise. To engage the SCV feature:

1. Press AUDIO.

2. Press SOUND.

SOUND

FM1

FM2

SEEK

TUNE

PRESET SCAN

AUTO SET

SCAN

RDS

TRAFFIC

INFO

PTY

SET PTY

87.9

89.9

98.1

98.5

106.3 107.9

2006 Town Car

(tow)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for Town Car 2006










































































































































































































































































































































Search results

Summary of Contents for Town Car 2006

Reviews:

Related manuals for Town Car 2006

Brands by name

Popular brands

Ford Town Car 2006, Owner'S Manual

Search results

Summary of Contents for Town Car 2006

Reviews:

Related manuals for Town Car 2006

Brands by name

Popular brands