manualshive.com logo in svg

Ford Town Car 2006, Owner'S Manual

The Ford Town Car 2006 Owner's Manual is available for download absolutely free! This comprehensive manual provides detailed instructions and information about the car's features and maintenance. Don't miss the chance to download it today from manualshive.com and have all the necessary knowledge at your fingertips.

Share
Download
background image

Even when the ABS is disabled,
normal braking is still effective. (If
your BRAKE warning lamp
illuminates with the parking brake
released, have your brake system
serviced immediately by an authorized dealer.)

Parking brake with auto-release

Apply the parking brake whenever
the vehicle is parked.

To set the parking brake:

1. Move the gearshift to P (Park).

2. Push pedal downward.

The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned ON) until the
parking brake is fully released.

Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the OFF/LOCK position

and remove the key whenever you leave your vehicle.

The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.
Your vehicle has an automatic parking brake release. To release the
parking brake:
1. Start the vehicle.
2. Press the brake pedal.
3. Move the gearshift from the P (Park) position to one of the forward
gears (the parking brake will not release automatically when you shift
into reverse). The brake pedal must remain pressed while the gearshift is
moved.

P

!

BRAKE

HOOD

P

!

BRAKE

2006 Town Car

(tow)

Owners Guide (post-2002-fmt)
USA

(fus)

Driving

228

Summary of Contents for Town Car 2006










































































































































































































































































































































Reviews:

No comments

Related manuals for Town Car 2006

Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
Needit Park Mini User Manual preview
Park Mini
Brand: Needit Pages: 2
Gemini KIT ParkingSensor 814 Installation And Use Manual preview
KIT ParkingSensor 814
Brand: Gemini Pages: 6
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4
Or-Fab 82301 Installation Instructions preview
82301
Brand: Or-Fab Pages: 3
X-Armour XR-9500 Installation And Owner'S Manual preview
XR-9500
Brand: X-Armour Pages: 16
Volkswagen 2K3 061 161 A Installation Instructions preview
2K3 061 161 A
Brand: Volkswagen Pages: 2
Classic Accessories Quad Gear 18-029-010401-00-SC Instructions preview
Quad Gear 18-029-010401-00-SC
Brand: Classic Accessories Pages: 4

Brands by name

Popular brands

Load more brands