SWITCHING THE HAZARD
FLASHERS ON AND OFF
The hazard flashers operate with the
power on or off. The battery loses charge
and may have insufficient power to restart
your vehicle.
The hazard flasher button is on
the center console. Press the
button to turn on the hazard
flashers if your vehicle is creating a safety
hazard for other road users.
When you switch the hazard flashers on,
all front and rear direction indicators flash.
Press the button again to switch them off.
JUMP STARTING THE VEHICLE
Jump Starting Precautions
WARNING:
Connect batteries with
only the same nominal voltage.
WARNING:
Use only adequately
sized cables with insulated clamps.
Note:
This procedure is only for the 12 volt
under hood battery.
Note:
Your vehicle has a 12 volt battery that
is easily accessible under the hood. The 12
volt battery controls the switches and
contacts that engage the high voltage
battery. Do not jump start the high voltage
battery using a standard 12 volt battery. Tow
your vehicle to an authorized dealer if the
high voltage battery does not accept a
regular charge.
Note:
Do not attempt to push start your
vehicle. You could cause transmission
damage.
Note:
Do not disconnect the 12 volt battery
from your vehicle electrical system.
Preparing the Vehicle
Opening the Front Luggage
Compartment With No Vehicle
Power
If the vehicle has no power, you will be
unable to open the front luggage
compartment. To open the front luggage
compartment follow the steps below:
1.
Use an external power supply such as
a 12 volt jump box.
E323341
2. Remove the cover at the front of your
vehicle below the headlight. Press
firmly on the top right of the covers
edge, then pull the raised section on
the bottom left toward you.
59
Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202008, First-Printing
Crash and Breakdown Information