manualshive.com logo in svg

Ford Mariner Hybrid 2009, Owner'S Manual

Get the most out of your Ford Mariner Hybrid 2009 with the comprehensive Owner's Manual. Download it for free from manualshive.com and unlock a wealth of valuable information on maintenance, operation, and troubleshooting. This manual is a must-have resource for every Mariner Hybrid owner.

Share
Download
background image

If you drive in extremely hot climates:

•

It is still necessary to maintain the coolant concentration
above 40%.

•

NEVER decrease the coolant concentration below 40%.

•

Decreased engine coolant concentrations below 40% will
decrease the corrosion protection characteristics of the engine
coolant and may cause engine damage.

•

Decreased engine coolant concentrations below 40% will
decrease the freeze protection characteristics of the engine
coolant and may cause engine damage.

•

Refer to the chart on the coolant container to ensure the
coolant concentration in your vehicle will provide adequate
protection at the temperatures in which you drive.

Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.

FUEL FILTER

Your vehicle is equipped with a lifetime fuel filter that is integrated with
the fuel tank. Regular maintenance or replacement is not needed.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

WARNING:

Do not overfill the fuel tank. The pressure in an

overfilled tank may cause leakage and lead to fuel spray and fire.

WARNING:

The fuel system may be under pressure. If you hear

a hissing sound near the fuel filler door (Easy Fuel™ “no cap”

fuel system), do not refuel until the sound stops. Otherwise, fuel may
spray out, which could cause serious personal injury.

WARNING:

Automotive fuels can cause serious injury or death

if misused or mishandled.

WARNING:

Gasoline may contain benzene, which is a

cancer-causing agent.

2009 Mariner Hybrid

(mhv)

Owners Guide, 1st Printing
USA

(fus)

Maintenance and Specifications

286

Summary of Contents for Mariner Hybrid 2009














































































































































































































































































































































Reviews:

No comments

Related manuals for Mariner Hybrid 2009

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
A-Tach Mounts 50131 Instructions preview
50131
Brand: A-Tach Mounts Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Safe Fleet PRIME DESIGN VCR-TC11B Assembly Instructions Manual preview
PRIME DESIGN VCR-TC11B
Brand: Safe Fleet Pages: 12
Prorack K623 Fitting Instructions Manual preview
K623
Brand: Prorack Pages: 15
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
Edelbrock PRO-FLO XT 3527 User Manual preview
PRO-FLO XT 3527
Brand: Edelbrock Pages: 39
Nos 05183NOS Owner'S Manual preview
05183NOS
Brand: Nos Pages: 22
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13

Brands by name

Popular brands

Load more brands