4. Disconnect the negative (-) battery
cable terminal first.
5. Disconnect the positive (+) battery
cable terminal last.
6. Remove the battery securing clamp.
7.
Remove the battery.
8. Install in the reverse order.
Note:
Before reconnecting the battery,
make sure the ignition remains switched off.
Note:
If you only disconnect the negative
battery cable terminal, make sure it is
isolated or placed away from the battery
terminal to avoid un-intended connection
or arcing.
Note:
Make sure the battery cable terminals
are fully tightened.
Note:
If you disconnect or replace the
battery, you must reset the clock and the
pre-set radio stations once the battery is
reconnected.
Battery Disposal
E107998
Make sure that you dispose of
old batteries in an
environmentally friendly way.
Seek advice from your local authority
about recycling old batteries.
CHECKING THE WIPER
BLADES
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE FRONT WIPER
BLADES
E72899
1
2
1.
Lift the wiper arm and then press the
wiper blade locking button.
Note:
Do not hold the wiper blade to lift the
wiper arm.
2. Remove the wiper blade.
Note:
Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
3. To install, reverse the removal
procedure.
Note:
Make sure that the wiper blade locks
into place.
CHANGING THE REAR WIPER
BLADES
Note:
Do not hold the wiper blade when
lifting the wiper arm.
Note:
Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
1.
Lift the wiper arm.
194
2019 Fiesta (CCT) Canada/United States of America, KE8J 19A321 AA enUSA, Edition date: 201806, Second-Printing
Maintenance
Summary of Contents for Fiesta 2019
Page 3: ......
