12
ASSEMBLY
•
Place generator on a level surface.
Remove the crankcase dipstick to ensure you do not overfill the engine.
Insert a funnel into the crankcase dipstick hold and carefully add 4-Cycle engine oil (SAE10W- 40 CD) to empty reservoir
until oil reaches the outer edge of the oil fill hole (crankcase dipstick hole).
Be sure to replace dipstick before attempting to start the engine.
To check oil, set generator on a level surface, wipe dipstick clean, then reinsert dipstick without rethreading.
•
•
•
•
Adding / Checking Engine Oil (See Fig 4)
You must add engine oil before first operating this generator. Always checkengine oil level
before each operation.
CAUTION!
W
W
CAUTION!
Fig 4
10W4
0
CD O
IL
Fig 5
•
Set generator on a clean and level surface in an area that is well ventilated.
•
Remove fuel Fill cap..
•
Insert a funnel into the fuel tank and carefully pour diesel into
the tank until fuel level reaches 2 inches below the
top of the neck. Be careful not to overfill the tank to
provide space for fuel expansion.
Adding Fuel (See fig 5)
DIE
SE
L