manualshive.com logo in svg

Ford Escape Hybrid 2007, Owner'S Manual

The Ford Escape Hybrid 2007 offers the perfect blend of efficiency and versatility. Navigate your way on the roads with ease using the Quick Reference Manual, available for free download from manualshive.com. This comprehensive manual ensures that you can enjoy every feature of this remarkable hybrid SUV.

Share
Download
background image

•

Minimize A/C and defroster usage. Selecting MAX A/C, defrost, or
defrost/floor mode on the climate control system will force the engine
to run continuously and reduce fuel economy.

•

Minimize temperature extremes when the vehicle is parked, for
example by storing in a garage to avoid extreme cold in winter and
extreme sun loads in summer. The high voltage battery operates more
efficiently in moderate temperatures.

•

Combine errands. Your vehicle is more fuel efficient when the engine
is warm. Driving to your farthest destination first will warm the engine
more quickly and may improve fuel economy for the rest of the trip.

Maintenance

•

Keep tires properly inflated and use only recommended size.

•

Keep wheels properly aligned.

•

Use recommended engine oil. Refer to

Lubricant specifications

in

this chapter.

•

Perform all regularly scheduled maintenance items. Follow the
recommended maintenance schedule and owner maintenance checks
found in

scheduled maintenance information.

Conditions

•

Heavily loading a vehicle or towing a trailer may reduce fuel economy
at any speed.

•

Carrying unnecessary weight may reduce fuel economy (approximately
1 mpg [0.4 km/L] is lost for every 300 lb [136 kg] of weight carried).

•

Adding certain accessories to your vehicle (for example bug
deflectors, rollbars/light bars, running boards, ski/luggage racks, flags)
may reduce fuel economy.

•

Using fuel blended with alcohol may lower fuel economy.

•

Driving on flat terrain offers improved fuel economy as compared to
driving on hilly terrain.

•

Close windows for high speed driving.

EPA window sticker

Every new vehicle should have the EPA window sticker. Contact your
authorized dealer if the window sticker is not supplied with your vehicle.
The EPA window sticker should be your guide for the fuel economy
comparisons with other vehicles.

It is important to note the box in the lower left corner of the window
sticker. These numbers represent the Range of MPG (L/100 km)

2007 Escape Hybrid

(ehv)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

290

Summary of Contents for Escape Hybrid 2007


















































































































































































































































































































































Reviews:

No comments

Related manuals for Escape Hybrid 2007

Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
Kia Sorento Owner'S Manual preview
Sorento
Brand: Kia Pages: 51
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Tactik Tube Doors Installation & Use Instructions preview
Tube Doors
Brand: Tactik Pages: 4
banks 61410 Owner'S Manual preview
61410
Brand: banks Pages: 76
Husky 31564 Assembly, Installation, Operation And Maintenance Instructions preview
31564
Brand: Husky Pages: 8
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
Yakima K1095 Instructions Manual preview
K1095
Brand: Yakima Pages: 12
Curt Group Aries 2074113 Installation Manual preview
Aries 2074113
Brand: Curt Group Pages: 2
Mitsubishi Montero 1987 Service Manual preview
Montero 1987
Brand: Mitsubishi Pages: 284
Federal Signal Corporation LEDTCL97 Installation And Service Instructions Manual preview
LEDTCL97
Brand: Federal Signal Corporation Pages: 12
Cadillac XT4 2023 Owner'S Manual preview
XT4 2023
Brand: Cadillac Pages: 362
hager XEV1R22T2 Series Operating Instructions Manual preview
XEV1R22T2 Series
Brand: hager Pages: 14
Honda 2011 ODYSSEY TOURING Technology Reference Manual preview
2011 ODYSSEY TOURING
Brand: Honda Pages: 21

Brands by name

Popular brands

Load more brands