Ford Escape Hybrid 2007 Owner'S Manual Download Page 24

Page: 24 / 337

Select:

Use with Bass, Treble, Balance, Fade and other menu selections.

12.

FOLDER

: Press to access

the next MP3 directory folder.

13.

FOLDER

: Press to access

the previous MP3 directory folder.

14.

Bass:

Press BASS; then press

SEL

to decrease/increase

the bass output.

Treble:

Press TREB; then press

SEL

to decrease/increase

the treble output.

15.

Fast Forward (FF):

In CD

mode, press and hold to fast
forward. In tape mode, press to
activate fast forward. Press FF again
to return to play.

16.

Rewind (REW):

In CD mode,

press and hold to reverse CD. In
tape mode, press to rewind. Press
REW again to return to play.

17.

Memory preset buttons:

To set a station: Press BAND to select the

frequency band (AM/FM1/FM2) tune to a station, press and hold a preset
button until sound returns.

18.

Scan:

Press to hear a brief

sampling of all listenable stations,
tape selections or CD tracks. Press
again to stop.

19.

Tune/CAT:

TUNE: Works in

radio mode only. Press
TUNE

to change frequency

down/up.

REW

2007 Escape Hybrid

(ehv)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for Escape Hybrid 2007


















































































































































































































































































































































Search results

Summary of Contents for Escape Hybrid 2007

Reviews:

Ford Escape Hybrid 2007, Owner'S Manual, Page: 24 / 337

Search results

Summary of Contents for Escape Hybrid 2007

Reviews: