Ford Edge 2016, Owner'S Manual

Page: 54 / 391

Using the information display controls, scroll to:
Action and Description Message
Press the OK button. Settings
Press the OK button. Vehicle settings
Press the OK button. Alarm
Press the OK button. Ask on exit
Appears in the information display each time you switch your
vehicle off. Reduced guard
If you wish to arm the alarm with reduced guard, press the
OK button when this message appears.
If you wish to arm the alarm with full guard, leave your vehicle
without pressing the
OK button.
Note: Selecting reduced guard does not set the alarm permanently to reduced guard. It
sets it to reduced guard only for the current locking cycle.
Arming the Alarm
To arm the alarm, lock your vehicle. See
Locks (page 39).
Disarming the Alarm
Vehicles Without Keyless Entry
Disarm and silence the alarm by unlocking
the doors with the key and switching your
vehicle on with a correctly coded key or
unlocking the doors with the remote
control.
Vehicles with Keyless Entry
Note: A valid passive key must be located
within the detection range of that door for
keyless entry. See
Keyless Entry (page 45).
Disarm and silence the alarm by unlocking
the doors and switching your vehicle on or
unlocking the doors with the remote
control.
ANTI-THEFT ALARM -
VEHICLES WITH: INTEGRAL
BATTERY
Alarm System
WARNING
Do not arm the alarm with full guard
if passengers, animals or other
moving objects are inside your
vehicle.
Perimeter Alarm
The perimeter alarm is a deterrent against
unauthorized access to your vehicle
through the doors and the hood.
Interior Sensors
The interior lamp unit sensors are located
in the overhead console.
Note: Do not cover up the interior lamp unit
sensors.
50
Edge (CDQ, CWB) Vehicles Built From: 07-12-2015, GT4J 19A321 AKA enGBR, First Printing
Security