Ford 7S7J-19A285-DA, Owner'S Handbook Manual

Page: 22 / 60

SECURITY CODE
The system incorporates a unique
Keycode security number that must
be entered before the unit will
operate. Normally, the Dealer does
this during the predelivery inspection.
If the battery is disconnected for any
reason, or the audio unit is removed
from the vehicle, the Keycode must
be re-entered before the unit will
work again.
LOST SECURITY CODE
If you lose the Keycode, contact your
dealer and supply details of your unit
along with some proof of identity.
Your Dealer will then obtain the
correct code for you.
ENTERING A SECURITY
CODE
If CODE - - - - , CODE 0000 ,
SAFE
or
ENTER KEYCODE
appears in the display when you
switch on the navigation unit, you
must enter the Keycode using the
on screen instructions.
Use the touchscreen keypad to enter
the correct code.
INCORRECT SECURITY
CODE
CAUTION
Make sure you have entered the
correct code before confirming
the entry. Repeated incorrect entries
may cause a permanent lock.
Up to three Keycode entry attempts
are allowed before the unit will lock
for one hour.
DISABLING A SECURITY
CODE
CAUTION
It is recommended to leave
anti-theft protection enabled.
Keycode protection can be switched
on or off. This is possible by pressing
the MENU button and selecting the
anti-theft features under the factory
settings option.
With Keycode protection disabled,
there is no limit on entry
opportunities, if you enter an
incorrect Keycode. It also means
that, if the unit is disconnected from
a power supply then reconnected, it
will be usable without entering a
Keycode.
If a Keycode protected system is
removed from the vehicle and power
supply, then reconnected, the
correct Keycode must be entered
before the unit will operate.
20
Navigation system security