Arming the Alarm
The system is ready to arm whenever the ignition is off. Lock the vehicle
to arm the alarm.
The turn signal lamps will flash once after locking the vehicle to indicate
the alarm is in the pre-armed mode. It will become fully armed in
20 seconds.
Disarming the Alarm
To disarm the alarm, do any of the following:
•
Press the power door unlock button within the 20-second pre-armed
mode.
•
Press the unlock button on the remote control.
•
Unlock the doors with the keyless entry pad.
•
Enter the vehicle using intelligent access (if equipped).
•
Turn the ignition on with a valid key (if equipped with an integrated
keyhead transmitter only).
•
Press the panic button on the remote control. The alarm system will
still be armed, but this shuts off the horn and turn lamps when the
alarm is sounding.
Note:
If the driver door is unlocked with a key, a tone will sound when
you open the door and a message will appear in the information display.
You will have 12 seconds to disarm the alarm using any of the actions
above, otherwise the alarm will trigger.
Security
89
2015 Flex
(471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)