Graphic
display (bars
between
vehicles)
Following
distance
Following
distance at
60 mph
(100 km/h)
Dynamic
behavior
1 bar
1 second
31 yards (28 m)
Sporty
2 bars
1.4 seconds
43 yards (39 m)
Normal
3 bars
1.8 seconds
55 yards (50 m)
Normal
4 bars
2.2 seconds
67 yards (61 m)
Comfort
Each time you restart your vehicle, the system will select the last chosen
gap for the current driver.
Disengaging Adaptive Cruise Control
Press the brake pedal or press
CNCL
to disengage the system.
Disengaging the system will not erase your previous set speed.
Overriding Adaptive Cruise Control
WARNING:
Whenever the driver is overriding the ACC by
pressing the accelerator pedal, the ACC will not automatically
apply the brakes to maintain separation from any vehicle ahead.
You can override the set speed and gap distance by pressing the
accelerator pedal.
When you are overriding the system, the green indicator light
illuminates and the follow vehicle does not show in the
information display. The system will resume operation when
you release the accelerator pedal. The vehicle speed will decrease to the
set speed, or a lower speed if following a slower vehicle.
Changing the Set Speed
There are three ways to change the set speed:
•
Accelerate or brake to the desired speed and press
SET
upward and
release.
•
Increase or decrease the speed by holding
SET
upward or downward
until the desired set speed is shown on the information display. The
vehicle speed will gradually change to the selected speed.
232
Cruise Control
2015 Flex
(471)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)