3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
You can repeat this on each waveband and
for each preset button.
Phone
Note:
Using the system with the engine off
will drain the battery.
Note:
As no common agreement exists, cell
phone manufacturers are able to implement
a variety of profiles in their Bluetooth
devices. Because of this, an incompatibility
can occur between the phone and hands
free system, which in some cases may
significantly degrade the system
performance. To avoid this situation, only
recommended phones should be used. To
check your cell phone's compatibility, refer
to your device's manual or visit the regional
Ford website.
This section describes the functions and
features of the Bluetooth cell phone hands
free system.
The Bluetooth cell phone part of the
system provides interaction with the audio
system and your cell phone. It allows you
to use the audio system to make and
receive calls without having to hold your
cell phone.
Bluetooth Setup
Note:
Up to five Bluetooth devices can be
paired to the system.
Note:
If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Note:
Even if connected to the system, your
phone can still be used in the usual way.
Note:
A call will be disconnected if the
audio unit is switched off. If the ignition is
switched off the phone call will remain in
progress.
Before you can use your cell phone with
your vehicle it must be paired to the audio
system.
The following procedure is required before
an initial Bluetooth phone connection can
be made.
The information display may show your
cell phone's battery charge level and signal
strength.
Using the device
Note:
To enable or disable the bluetooth
connectivity on the radio, press the
MENU
button and go to the bluetooth screen. Use
up and down arrow to switch on or off and
press
OK
button to confirm.
1. Press the
PHONE
button and then
keep pressing the
MENU
button to
scroll to the
ADD DEVICE
display.
Press the
OK
button.
2. Select the
VIA DEVICE
and press
OK
.
3. Once
VIA DEVICE
has been selected
FIND FORD BT
will be displayed on
the radio display.
4. Note the six digit number displayed.
5. Search for Bluetooth devices using the
cell phone. For information on phone
settings, refer to your phone user guide.
6. Select
FORD BT
from the list of
Bluetooth devices found by your phone.
7. Check if the number on the radio
display matches the number displayed
on your phone and confirm pairing if
prompted
8. Once pairing has been successful
SET
PRIMARY
will be displayed on the
radio display.
174
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Audio System
