Engine Coolant Temperature
Warning Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by an authorized dealer immediately.
If it stays on after starting or
illuminates when driving, this
indicates a malfunction. Stop
your vehicle as soon as it is safe to do so
and switch the engine off. Check the
coolant level. See
Engine Coolant Check
(page 128).
Engine Oil Warning Lamp
WARNING
Do not resume your journey if it
illuminates despite the level being
correct. Have your vehicle checked
by an authorized dealer immediately.
If it illuminates with the engine
running or when you are driving,
this indicates a malfunction.
Stop your vehicle as soon as it is safe to
do so and switch the engine off. Check the
engine oil level. See
Engine Oil Check
(page 127).
Engine Warning Lamps
Malfunction Indicator Lamp
E180329
Powertrain Malfunction Warning
Lamp
All Vehicles
If either lamp illuminates when the engine
is running, this indicates a malfunction. The
engine will continue to run but it may have
limited power. If it flashes when you are
driving, reduce the speed of your vehicle
immediately. If it continues to flash, avoid
heavy acceleration or deceleration. Have
your vehicle checked by an authorized
dealer immediately.
WARNING
Have this checked immediately.
If both lamps illuminate together, stop your
vehicle as soon as it is safe to do so
(continued use may cause reduced power).
Switch the ignition off and attempt to
restart the engine. If the engine restarts
have your vehicle checked by an authorized
dealer immediately. When the engine does
not restart have your vehicle checked
before continuing your journey.
Front Airbag Warning Lamp
(If
Equipped)
If it fails to illuminate when you
start your vehicle, continues to
flash or remains on, it indicates
a malfunction. Have your vehicle checked
by an authorized dealer.
Front Fog Lamps Indicator
(If Equipped)
It will illuminate when you switch
the front fog lamps on.
Fuel Heater Indicator
(If Equipped)
If it illuminates, wait until it
extinguishes before starting. If it
flashes, switch the ignition off
and then back on again. Wait until it
extinguishes before starting.
53
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Instrument Cluster