Unlocking and Locking the Doors
To unlock the driver door:
Enter the factory-set 5-digit code or your
personal code. You must press each number within five seconds of each
other. The interior lamps will illuminate.
Note:
All doors will unlock if
the two-stage unlocking feature is disabled. Refer to
Locking and
Unlocking
earlier in this chapter.
To unlock all doors:
Enter the factory-set code or your personal code,
then press
3
•
4
within five seconds.
To lock all doors:
Press and hold
7
•
8
and
9
•
0
at the same time with
the driver door closed. You do not need to enter the keypad code first.
Displaying the Factory-Set Code
With Integrated Keyhead Transmitters
Note:
You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory-set code in the information display:
1. Place the first programmed key into the ignition and switch on the
ignition.
2. Switch the ignition off and remove the first programmed key.
3. Place the second programmed key into the ignition.
The factory-set code will briefly appear in the message center.
84
Locks
2015 Explorer
(exp)
Owners Guide gf, 2nd Printing, September 2014
USA
(fus)