Manually overriding the system
When the automatic control has
activated high beams, pushing or
pulling the stalk will provide a
temporary override to low beam.
To permanently deactivate the system use the information display menu
or turn the lighting control switch from autolamps to headlamps.
FRONT FOG LAMPS
The fog lamps can be turned on when the
lighting control is in the headlamps, parking
lamps or autolamps positions and the high
beams are not turned on.
DIRECTION INDICATORS
The turn signal lever does not mechanically lock in the upward or
downward position when activated. The turn signal control activation and
cancellation is electronic.
•
Push down to activate the left turn
signal.
•
Push up to activate the right turn
signal.
•
Push the lever again in either direction to manually cancel turn signal
operation.
Note:
Tap the lever up or down to make the direction indicators flash
only three times to indicate a lane change.
Lighting
103
2015 Explorer
(exp)
Owners Guide gf, 2nd Printing, September 2014
USA
(fus)