Ford 2012 Escape Hybrid Owner'S Manual Download Page 83

Page: 83 / 358

Turning off speed control

To turn off the speed control, press OFF or turn off the ignition.

Note:

When you turn off the speed control or the ignition, your speed

control set speed memory is erased.

STEERING WHEEL CONTROLS

Radio control features

VOL + (Volume):

Press to increase

the volume.

VOL – (Volume):

Press to decrease

the volume.

(Seek):

Press to select

the previous/next radio station
preset, CD track or satellite radio
channel (if equipped) depending on
which media mode you are in.

MEDIA:

Press repeatedly to scroll

through available audio modes.

Navigation system hands-free
control features (if equipped)

Press and hold

control briefly

until the voice

icon appears on

the navigation display to use the
voice command feature.

Press

to complete a voice

command.

For further information on the
navigation system, refer to the

Navigation System

supplement.

Driver Controls

2012 Escape Hybrid

(ehv)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 Escape Hybrid







































































































































































































































































































































































Search results

Summary of Contents for 2012 Escape Hybrid

Reviews:

Brands by name

Popular brands

Ford 2012 Escape Hybrid, Owner'S Manual

Search results

Summary of Contents for 2012 Escape Hybrid

Reviews:

Brands by name

Popular brands