manualshive.com logo in svg

Ford 2012 Escape Hybrid, Owner'S Manual

The Ford 2012 Escape Hybrid Owner's Manual is a comprehensive guide that provides valuable information about your vehicle. Easily downloadable and free of cost, this manual equips you with detailed instructions, maintenance tips, and safety guidelines. Visit manualshive.com to download your copy and unlock the full potential of your Ford Escape Hybrid.

Share
Download
background image

•

SONG SEEK MENU-

Press OK to enter song seek menu.

Press

/

to scroll through the following options:

a. SAVE THIS SONG?:

Press OK to save the currently playing song’s

title in the system’s memory. (If you try to save something other than
a song, CANT SAVE will appear in the display.) When the chosen song
is playing on any satellite radio channel, the system will alert you with
an audible prompt. Press OK while SONG ALERT is in the display and
the system will take you to the channel playing the desired song. You
can save up to 20 song titles. If you attempt to save more than 20
titles, the display will read REPLACE SONG? Press OK to access the
saved titles and press

/

to cycle through the saved titles. When

the song title appears in the display that you would like to replace,
press OK. SONG REPLACED will appear in the display.

b. DELETE A SONG?:

Press OK to delete a song from the system’s

memory. Press

/

to cycle through the saved songs. When the

song appears in the display that you would like to delete, press OK.
The song will appear in the display for confirmation. Press OK again
and the display will read SONG DELETED. If you do not want to
delete the currently listed song, press

/

to select either

RETURN or CANCEL.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

c. DELETE ALL SONGS?:

Press OK to delete all song’s from the

system’s memory. The display will read ARE YOU SURE ? Press OK to
confirm deletion of all saved songs and the display will read ALL
DELETED.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

d. DISABLE ALERTS/ENABLE ALERTS?:

Press OK to

enable/disable the satellite alert status which alerts you when your
selected songs are playing on a satellite radio channel. (The system
default is disabled.) SONG ALERTS ENABLED/DISABLED will appear
in the display. The menu listing will display the opposite state. For
example, if you have chosen to enable the song alerts, the menu
listing will read DISABLE as the alerts are currently on, so your other
option is to turn them off.

Entertainment Systems

42

2012 Escape Hybrid

(ehv)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 Escape Hybrid







































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Escape Hybrid

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Atera 022 681 Manual preview
022 681
Brand: Atera Pages: 10
RAM 4500 CHASSIS CAB 2012 Specification preview
4500 CHASSIS CAB 2012
Brand: RAM Pages: 7
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Volvo B13R Driver'S Handbook Manual preview
B13R
Brand: Volvo Pages: 24
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6

Brands by name

Popular brands

Load more brands