Unlocking and locking the doors and liftgate using keyless entry
To unlock the driver’s door,
enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate.
To unlock all doors and liftgate,
press the 3
•
4 control within five
seconds of entering the factory set 5-digit code or your personal code.
To lock all doors and liftgate,
press the 7
•
8 and the 9
•
0 at the
same time.
Note:
The driver’s door must be closed. You
do not
need to
enter the keypad code first.
To open the liftgate glass,
press the 5
•
6 after entering the factory
set 5-digit code or your personal code.
SECURILOCK
姞
PASSIVE ANTI-THEFT SYSTEM
SecuriLock
威
passive anti-theft system is an engine immobilization
system. This system is designed to help prevent the engine from being
started unless a
coded integrated keyhead transmitter (IKT)
programmed to your vehicle
is used. The use of the wrong type of
coded key may lead to a “no-start” condition.
Your vehicle comes with two coded integrated keyhead transmitters;
additional coded IKTs may be purchased from your authorized dealer.
Standard SecuriLock
威
keys without remote entry transmitter
functionality can also be purchased from your authorized dealer if
desired. The authorized dealer can program your spare IKTs to your
vehicle or you can program the IKTs yourself. Refer to
Programming
spare keys
for instructions on how to program the coded key.
Note:
The SecuriLock
威
passive anti-theft system is not compatible with
non-Ford aftermarket remote start systems. Use of these systems may
result in vehicle starting problems and a loss of security protection.
Note:
Large metallic objects, electronic devices that are used to
purchase gasoline or similar items, or a second coded key on the same
key chain may cause vehicle starting issues. You need to prevent these
objects from touching the coded IKT while starting the engine. These
objects will not cause damage to the coded IKT, but may cause a
momentary issue if they are too close to the IKT when starting the
engine. If a problem occurs, turn the ignition off, remove all objects on
the key chain away from the coded IKT and restart the engine.
Note: Do not leave a duplicate coded key in the vehicle. Always
take your keys and lock all doors when leaving the vehicle.
Locks and Security
113
2012 Escape Hybrid
(ehv)
Owners Guide, 1st Printing
USA
(fus)
