manualshive.com logo in svg

Ford 2012 05+ Mustang, Owner'S Manual

The Ford 2012 05+ Mustang Owner's Manual is a comprehensive guide to help Mustang owners navigate their vehicle. This manual is available to download for free from manualshive.com, providing users with easy access to valuable information on maintenance, features, and troubleshooting for their Ford Mustang.

Share
Download
background image

WARNING:

Fail-safe mode is for use during emergencies only.

Operate the vehicle in fail-safe mode only as long as necessary to

bring the vehicle to rest in a safe location and seek immediate repairs.
When in fail-safe mode, the vehicle will have limited power, will not be
able to maintain high-speed operation, and may completely shut down
without warning, potentially losing engine power, power steering assist,
and power brake assist, which may increase the possibility of a crash
resulting in serious injury.

WARNING:

Never remove the coolant reservoir cap while the

engine is running or hot.

5. Restart the engine and take your vehicle to an authorized dealer.

Driving the vehicle without repairing the engine problem
increases the chance of engine damage. Take your vehicle to an
authorized dealer as soon as possible.

FUEL FILTER

Your vehicle is equipped with a lifetime fuel filter that is integrated with
the fuel tank. Regular maintenance or replacement is not needed.

For Shelby fuel filter requirements, see the

Shelby GT500 Supplement.

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

Important safety precautions

WARNING:

Do not overfill the fuel tank. The pressure in an

overfilled tank may cause leakage and lead to fuel spray and fire.

WARNING:

The fuel system may be under pressure. If you hear

a hissing sound near the fuel filler door (Easy Fuel™ “no cap”

fuel system), do not refuel until the sound stops. Otherwise, fuel may
spray out, which could cause serious personal injury.

WARNING:

Automotive fuels can cause serious injury or death

if misused or mishandled.

Maintenance and Specifications

291

2012 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 05+ Mustang



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 05+ Mustang

Jeep Renegade Owner'S Handbook Manual preview
Renegade
Brand: Jeep Pages: 212
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Brand: TATA Motors Pages: 236
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
BURY CC 9040 Specification preview
CC 9040
Brand: BURY Pages: 2
Caltrend BM110 Installation Instructions preview
BM110
Brand: Caltrend Pages: 2
Advanced ICE 1296-1 Manual preview
1296-1
Brand: Advanced ICE Pages: 4
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Yakima LowRider Manual preview
LowRider
Brand: Yakima Pages: 15

Brands by name

Popular brands

Load more brands