manualshive.com logo in svg

Ford 2012 05+ Mustang, Owner'S Manual

The Ford 2012 05+ Mustang Owner's Manual is a comprehensive guide to help Mustang owners navigate their vehicle. This manual is available to download for free from manualshive.com, providing users with easy access to valuable information on maintenance, features, and troubleshooting for their Ford Mustang.

Share
Download
background image

SERVICE RECOMMENDATIONS

To help you service your vehicle, we provide

scheduled maintenance

information

which makes tracking routine service easy.

If your vehicle requires professional service, your authorized dealer can
provide the necessary parts and service. Check your

Warranty Guide

to

find out which parts and services are covered.

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft

威

parts are designed and built to

provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

•

Do not work on a hot engine.

•

Make sure that nothing gets caught in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all open flames and other burning material (such as cigarettes)
away from the battery and all fuel related parts.

Working with the engine off

1. For vehicles equipped with an automatic transmission, set the parking
brake and shift to P (Park). For vehicles equipped with a manual
transmission, set the parking brake, press and hold the clutch pedal,
place the gearshift in 1 (First), and release the clutch pedal.

2. Turn off the engine and remove the key.

3. Block the wheels.

Working with the engine on

1. For vehicles equipped with an automatic transmission, set the parking
brake and shift to P (Park). For vehicles equipped with a manual
transmission, set the parking brake, press and hold the clutch pedal,
place the gearshift in N (Neutral), and release the clutch pedal.

2. Block the wheels.

WARNING:

To reduce the risk of vehicle damage and/or

personal burn injuries, do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Maintenance and Specifications

275

2012 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 05+ Mustang



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 05+ Mustang

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
Hama Neptun Manual preview
Neptun
Brand: Hama Pages: 6
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
SpeedTech Lights STL Boss Quick Start Manual preview
STL Boss
Brand: SpeedTech Lights Pages: 2
Subaru impreza 2017 Owner'S Manual preview
impreza 2017
Brand: Subaru Pages: 786
Quadratec QuadraTop Adventure Top S Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 13
Laser PW-BT50AR Quick Start Manual preview
PW-BT50AR
Brand: Laser Pages: 3
Yakima Safety Pole Quick Start Manual preview
Safety Pole
Brand: Yakima Pages: 4

Brands by name

Popular brands

Load more brands