manualshive.com logo in svg

Ford 2012 05+ Mustang, Owner'S Manual

The Ford 2012 05+ Mustang Owner's Manual is a comprehensive guide to help Mustang owners navigate their vehicle. This manual is available to download for free from manualshive.com, providing users with easy access to valuable information on maintenance, features, and troubleshooting for their Ford Mustang.

Share
Download
background image

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working.

Do not splice into the vehicle lamp wiring for trailer lamps. Your
vehicle uses an advanced electronic module to control and
monitor your vehicle lamps. Splicing into the wiring or attaching
wiring to the vehicle bulb. may DISABLE the rear vehicle lamps
or cause them not to function properly.

Contact your authorized dealer as soon as possible for proper
instructions and equipment for hooking-up trailer lamps.

Driving while you tow

When towing a trailer:

•

Do not drive faster than 70 mph (113 km/h) during the first 500 miles
(800 km) of trailer towing and don’t make full-throttle starts.

•

Turn off the speed control. The speed control may shut off
automatically when you are towing on long, steep grades.

•

Use the grade assist feature (automatic transmissions) when towing.
This feature provides engine braking and helps eliminate excessive
shifting for optimum fuel economy and transmission cooling.

•

Allow more distance for stopping with a trailer attached; anticipate
stops and brake gradually.

Trailer towing tips

•

Practice turning, stopping and backing-up before starting on a trip to
get the feel of the vehicle-trailer combination. When turning, make
wider turns so the trailer wheels will clear curbs and other obstacles.

•

To aid in engine/transmission cooling and A/C efficiency during hot
weather while stopped in traffic, place the gearshift lever in P (Park)
(automatic transmission) or neutral (manual transmissions).

•

After you have traveled 50 miles (80 km), thoroughly check your
hitch, electrical connections and trailer wheel lug nuts.

•

If you are driving down a long or steep hill, shift to a lower gear. Do
not apply the brakes continuously, as they may overheat and become
less effective.

•

Vehicles with trailers should not be parked on a grade. If you must
park on a grade, place wheel chocks under the trailer’s wheels.

Tires, Wheels and Loading

201

2012 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2012 05+ Mustang



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 05+ Mustang

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Vauxhall Ampera Owner'S Manual preview
Ampera
Brand: Vauxhall Pages: 199
Wallbox Commander 2 Installation And User Manual preview
Commander 2
Brand: Wallbox Pages: 7
Vauxhall MOVANO Owner'S Manual preview
MOVANO
Brand: Vauxhall Pages: 177
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8

Brands by name

Popular brands

Load more brands