manualshive.com logo in svg

Ford 2010 05+ Mustang, Owner'S Manual

Share
Download
Ford 2010 05+ Mustang Owner'S Manual Download Page 60

4. Turn the headlamp control to the autolamp position. The headlamps
will turn on.

5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamp control to off. The headlamps
will turn off.

Fog lamp control (if equipped)

The fog lamps can be turned on
when the ignition is in the on
position, the headlamp control is in
the

or

position and the

high beams are not on.

Pull the headlamp control towards
you to turn on the fog lamps. The
indicator light under the fog lamp
symbol will illuminate.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

OFF

2010 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Lights

60

Summary of Contents for 2010 05+ Mustang































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands