Your vehicle has an all-door remote entry system.
The all-door remote entry system
allows you to:
•
lock or unlock both vehicle doors
without a key.
•
activate the panic alarm.
The remote entry features only
operate with the ignition in the 1
(LOCK) position.
If there are problems with the
remote entry system, make sure to
take
ALL remote entry transmitters
with you to the dealership in
order to aid in troubleshooting the problem.
Unlocking the doors
1. Press UNLOCK to unlock the driver’s door.
2. Press UNLOCK again within three seconds to unlock both doors.
Note:
The vehicle doors may be unlocked by using the remote entry
transmitter, however, in the event of a low battery charge, the door can
be manually unlocked and opened by inserting the key into the driver’s
door lock cylinder and turning counter clockwise.
Locking the doors
Press LOCK once to lock both doors. Pressing LOCK a second time will
sound the horn to confirm the doors are locked.
Sounding a panic alarm
Press
to activate the alarm. Press
again, or turn the ignition to the
3 (ON) position to deactivate.
Note:
The panic alarm will only operate when the ignition is in the 1
(LOCK) position.
Replacing the battery
The remote entry transmitter uses one button type three-volt lithium
battery CR2025 or equivalent.
To replace the battery:
1. Twist a thin coin between the two halves of the remote entry
transmitter near the key ring. DO NOT TAKE THE RUBBER COVER
AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE REMOTE
ENTRY TRANSMITTER.
2009 Low Cab Forward Truck
(lcf)
Supplement
USA
(fus)
Locks and Security
57
