Fluid
Ford Part
Name
Capacity
Fuel tank - Single tank, mounted
on left side
—
35 gallons
(132.0L)
Fuel tank - Single tank mounted
between frame sidemembers and
behind rear axle
—
40 gallons
(151.4L)
Fuel tanks - Dual
—
35 gallons
(132.0L) each
(1)
Add the coolant type originally equipped in your vehicle.
(2)
Ensure the correct automatic transmission fluid is used. Transmission
fluid type requirements are indicated on the tag located on the
transmission fill tube. Check the container to verify the fluid being added
is of the correct type. Refer to the
scheduled maintenance
information
to determine the correct service interval.
MERCON
威
, MERCON
威
V and MERCON
威
SP are not
interchangeable. DO NOT mix MERCON
威
, MERCON
威
V and
MERCON
威
SP. Use of dual usage fluids in an automatic
transmission application requiring MERCON
威
SP may cause
transmission damage. Use of a transmission fluid other than the
recommended fluid may cause transmission damage.
(3)
Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with an in-tank cooler. The
amount of transmission fluid and fluid level should be set by the
indication on the dipstick’s normal operating range.
(4)
Quantities listed are approximate. Fill axle until the lubricant level is
at the bottom of the filler hole, with the vehicle on level ground.
(5)
If hubs are removed, add an additional 1.6 pints (0.75L) of axle
lubricant. Add lubricant through the axle vent.
VEHICLE IDENTIFICATION NUMBER (VIN)
The VIN is printed on the Vehicle Rating Decal attached to the vehicle
on the edge of the drivers door or B-Pillar. The VIN also serves as the
warranty number. If you ever find it necessary to communicate with Ford
Motor Company about your vehicle, always include the VIN in your
communication.
2009 Low Cab Forward Truck
(lcf)
Supplement
USA
(fus)
Maintenance and Specifications
183
