•
After about 20 seconds, the
message CHANNELS CLEARED
will appear on the display. Do not
hold for longer that 30 seconds.
HomeLink
威
is now in the train
(or learning) mode and can be
programmed at any time
beginning with step 2 in the
“Programming” section.
Reprogramming a single HomeLink
姞
button
To program a device to HomeLink
威
using a HomeLink
威
button previously
trained, follow these steps:
1. Press and hold the desired
HomeLink
威
button.
DO NOT
release the button. The display will
read CHANNEL “X” (1,2 or 3)
TRANSMIT
2. The display will change to
CHANNEL “X” (1,2, or 3)
TRAINING after 20 seconds.
Without releasing the HomeLink
威
button, follow step 2 in the
“Programming” section.
For questions or comments, contact
HomeLink
威
at
www.homelink.com
or
1–800–355–3515.
2006 Grand Marquis
(grn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
62
