•
Continue to press and hold the
HomeLink
威
button (note step 3
in the “Programming” section)
while you press and release —
every two seconds
(“cycle”)
your hand-held transmitter until
the frequency signal has been
accepted by the HomeLink
威
. The
message CHANNEL “X” (1,2 or 3)
TRAINING will appear on the
display.
•
Proceed with step 4 in the “Programming” section.
Operating the HomeLink
姞
Wireless Control System
To operate, simply press and release the appropriate HomeLink
威
button.
Activation will now occur for the trained product (garage door, gate
operator, security system, entry door lock, or home or office lighting
etc.). For convenience, the hand-held transmitter of the device may also
be used at any time. In the event that there are still programming
difficulties, contact HomeLink
威
at
www.homelink.com
or
1–800–355–3515.
Erasing HomeLink
姞
buttons
To erase the three programmed buttons (individual buttons cannot be
erased):
•
Press and hold the two outside
buttons. The message CLEARING
CHANNELS will appear on the
HomeLink
威
display.
2006 Grand Marquis
(grn)
Owners Guide (post-2002-fmt)
USA
(fus)
Driver Controls
61
