Ford 2006 F-150, Owner'S Manual, Page: 106 / 336

Message center procedure
For information regarding the activation and deactivation of the
autolocks feature using the message center, refer to
Message center (if
equipped)
in the
Driver Controls
chapter.
KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry
keypad to:
•
lock all vehicle doors.
•
unlock only the driver’s door.
•
unlock all vehicle doors.
•
program/erase the customer keycode.
•
enable/disable the autolocking feature.
The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box, is marked on
the computer module, and is available from your authorized dealer. You
can also create your own 5–digit personal entry code.
When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.
Antiscan feature
The keyless entry keypad is equipped with an anti-theft function called
“antiscan.” The antiscan feature provides a one-minute lockout feature,
where the user is unable to enter the vehicle using the keypad; this
lockout occurs when a valid entry code has not been entered by the user
within 7 attempts (35 consecutive button presses). During the lockout,
the keypad will flash and pressing the controls on the keypad will be
ignored, except for pressing the 7
•
8 and the 9
•
0 controls
simultaneously, which will still lock the vehicle.
The antiscan feature will be turned off after:
•
one minute, when the antiscan feature times out.
•
one minute of keypad inactivity.
•
the control is pressed on the remote entry transmitter.
•
the ignition is turned from the 1 (OFF/LOCK) position to the 3 (ON)
position, or from the 3 (ON) position to the 1 (OFF/LOCK) position.
2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
106