•
4.0L SOHC V6 engine
•
Oil levels above the MAX mark may cause engine damage. Some oil
must be removed from the engine by a service technician.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to
Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
MAX mark or the letter F in FULL on the engine oil level indicator
(dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap clockwise
until three clicks can be heard.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.
Maintenance and Specifications
246
Summary of Contents for 2002 Ranger
Page 146: ...4 Clip the tether strap to the anchor Seating and Safety Restraints 146...
Page 231: ...2 3L I4 engine 3 0L V6 engine Cleaning 231...
Page 243: ...3 0L V6 engine Maintenance and Specifications 243...
Page 245: ...2 3L I4 engine 3 0L V6 engine Maintenance and Specifications 245...
