3. Depress the clutch.
4. Move the transfer case shift lever
through N (Neutral) directly to 4H
(4WD High) or 2H (2WD high) and
hold the shift lever in position until
the transfer case has fully engaged
(up to 15 seconds).
5. If the transfer case
does not
engage, repeat steps 1 through 4.
Using the N (Neutral) position
The transfer case neutral position overrides the transmission and
puts the vehicle in neutral regardless of transmission gearshift
lever position. The vehicle can move forward or backwards.
This position should only be used
when towing the vehicle.
Do not leave the vehicle unattended with the transfer case in the
N (Neutral) position. Always set the parking brake fully and turn
off the ignition when leaving the vehicle.
Using the electronic shift 4WD system (if equipped)
Positions of the electronic shift system
2WD (2WD High)
– Power to rear axle only.
4X4 HIGH (4WD High)
– Power delivered to front and rear axles for
increased traction.
4X4 LOW (4WD Low)
– Power to front and rear axles at low speeds.
2H
4H
4L
N
2H
4H
4L
N
Driving
168
Summary of Contents for 2002 Ranger
Page 146: ...4 Clip the tether strap to the anchor Seating and Safety Restraints 146...
Page 231: ...2 3L I4 engine 3 0L V6 engine Cleaning 231...
Page 243: ...3 0L V6 engine Maintenance and Specifications 243...
Page 245: ...2 3L I4 engine 3 0L V6 engine Maintenance and Specifications 245...
